GENERAL DEscriptION
Sandstrom#238 Solid Film Lubricant is a lacquer-like
coating containing molybdenum disulfide and corrosion
inhibiting pigments. This Air Drying material prevents
corrosion, galling, seizing and fretting. It is a low-friction
coating which exhibits long wear life when operated at
-320oF to +500oF under loads exceeding 100,000 psi.
Sandstrom#238 should be applied wher baking with
the longer wearing, heat cured #099, Sandstrom 9A or
LC-300 is not desirable.
Excellent Corrosion Protection without the use of toxic
heavy metals and the use of non-HAP solvents are its
outstanding characteristics.
once Sandstrom#238 has been applied to a properly
prepared surface and allowed to cure, it is virtually unaffected
by atmospheric and fretting corrosion, solvents, acids, oils
and degreasers. Sandstrom#238 can be applied to all
metallic and non-metallic surfaces by spray application.
Complete application instructions are on page two of this
Technical Information Guide.